There are many kinds of conveyor accessories, but the main problems are as follows
1. The motor cannot be started, or it slowly stalls.
Treatment method:
a. Check the voltage and the lines on the transmission equipment;
b. Check the overloaded electrical appliances;
c. Reduce the operation times of conveying equipment when necessary;
2. The motor is hot and hot
Treatment method:
a. Remove the dust around the motor;
b. Measure the motor power and check the cause of overload;
c. Add lubricating oil to the transmission part of the conveying equipment;
3. Reducer overheating
Treatment method:
a. The oil volume in the machine shall be injected according to the specified requirements;
b. Clean the interior regularly and change the oil or bearings in time;
4. The conveyor belt deviates and slips
Treatment:
A. adjust the frame or roller to keep it straight;
b. Adjust the idler and correct the conveyor belt;
c. Ensure that the joint is perpendicular to the center of the conveyor belt;
d. Adjust the position of coal falling point;
5. Aging and tearing of conveyor belt
Treatment:
a. the conveyor belt must be kept according to the requirements of the manufacturer;
b. Ask professionals to replace it in time, and pay attention to prevent the mesh belt from hanging on the fixed components or falling into the metal components;
c. Try to avoid short distance laying
6. Broken transmission network
Treatment:
A. replace the aged and torn conveyor belt in time
b. Choose materials with stable physical properties, and pay attention to waterproof and cold proof
c. The joint Department should check regularly.
